![]() ![]() Some models have a removable section of the base for access to the brush-roll – check your instruction booklet for details. Remove the filters, tap off any loose dirt, hand wash using just water and allow to dry completely for 24 hours before re-inserting.įloorheads with one brush-roll: Detach the floorhead from your vacuum and remove any debris from the bristles. If the dust that they trap isn’t regularly cleaned away they can become blocked, which can result in poor suction over time. Your vacuum cleaner’s filters do an important job, removing dust and allergens from the air sucked in by your vacuum. Finally, check the arm of the floorhead – where you connect the wand – for blockages. You can also shine a torch into the hose. If this section is clear, or if you have a stick vacuum, look through the wand to ensure nothing has become lodged in the pipe. If you have an upright vacuum, first remove the handle and check if there is any suction once turned on – if not, there may be an obstruction in the handle or hose. You can check for blockages in the floorhead, wand, hose and airways. ![]() Make sure you remove any debris build-up if needed. ![]() Remove the dust cup using the release button(s), hold it over a bin and press the latch to empty the contents into the bin. Always turn off your vacuum before performing any maintenance.Įmpty the dust cup each time you vacuum and periodically during cleaning, if debris reaches the MAX fill line. Whether you have a corded or cordless vacuum cleaner, regular maintenance is simple and helps to keep your unit’s suction power optimal. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |